Machine Videos
Running video for every major machine type — actual line speed, profile output and dimensions, filmed in our own workshop. No stock footage.
CZ Purlin Roll Forming Machine
0:43 CZ Purlin Roll Forming Machine — Full Line Running | ZTRFM
the whole line from the entry end to the runout table, with the forming stations and hydraulic cutting unit visible.
Machine specifications →
0:25 CZ Purlin Machine — Cutting Station Detail | ZTRFM
a close-up of the cutting station at the end of the forming section.
Machine specifications →
1:10 CZ Purlin Machine — Forming Rolls and Stations Up Close | ZTRFM
the forming section up close: the roller sets, the drive side and the hydraulic stations along the line. (Source clip replaced 2026-09-17 — the previous footage carried a third-party watermark.)
Machine specifications →Decoiling & Leveling Machine
0:45 Decoiling & Leveling Machine — Control Panel and Hydraulics | ZTRFM
the control panel and hydraulic power unit of the decoiling and leveling line.
Machine specifications →
0:49 Decoiling & Leveling Machine — Strip Entering the Leveler | ZTRFM
strip running through the leveling section.
Machine specifications →
1:10 Decoiling & Leveling Machine — Operator Feeding the Line | ZTRFM
an operator feeding the strip through the machine at the entry end.
Machine specifications →Double Layer Roofing Roll Forming Machine
1:10 Double Layer Roll Forming Machine — Forming Rolls Close-Up | ZTRFM
the upper forming bank of the double layer machine.
Machine specifications →
1:10 Double Layer Roll Forming Machine — Forming Stations | ZTRFM
the forming stations of the double layer roofing machine.
Machine specifications →
1:10 Double Layer Roofing Machine — Finished Profiled Panels | ZTRFM
the finished profiled panels coming off the line.
Machine specifications →Floor Deck Roll Forming Machine
0:43 Floor Deck Roll Forming Machine — Forming and Cutting Station | ZTRFM
the forming and cutting station, with the deck profile visible at the output end.
Machine specifications →
0:52 Floor Deck Roll Forming Machine — Roller Bank | ZTRFM
a close-up of the roller bank that forms the deck ribs.
Machine specifications →
1:10 Floor Deck Roll Forming Machine — Forming Rolls in Operation | ZTRFM
the forming rolls running, viewed along the line.
Machine specifications →Glazed Tile Roll Forming Machine
1:10 Glazed Tile Roll Forming Machine — Forming Station Close-Up | ZTRFM
a forming station of the glazed tile line, where the step profile is pressed into the sheet.
Machine specifications →
1:10 Glazed Tile Roll Forming Machine — Line Overview | ZTRFM
an overview of the glazed tile line, showing the frame and the forming section.
Machine specifications →
1:10 Glazed Tile Roll Forming Machine — Tile Profile Rolls | ZTRFM
the roll set that produces the tile profile, shown close up.
Machine specifications →IBR Roof Sheet Roll Forming Machine
1:10 Trapezoidal Roof Sheet Machine — Operator Hand-Feeding the Profile | ZTRFM
an operator guiding the trapezoidal sheet by hand as it comes off the line.
Machine specifications →
0:43 Trapezoidal Roof Sheet Machine — Sheet Feed and Runout | ZTRFM
the sheet being fed through the line and supported on the runout table.
Machine specifications →
1:10 Trapezoidal Roof Sheet Machine — Drive and Forming Stations | ZTRFM
the drive motor and the forming stations of the trapezoidal roof sheet machine.
Machine specifications →Sigma Purlin Roll Forming Machine
1:10 Sigma Purlin Roll Forming Machine — Forming Station Detail | ZTRFM
a forming station of the sigma purlin machine, shown close up.
Machine specifications →Solar Strut Channel Roll Forming Machine
1:10 Solar Strut Channel Machine — Drive Motor, 5.5 kW / 20 m per min | ZTRFM
the transmission motor and drive of the solar strut channel machine. The specification shown on the machine is 5.5 kW with a forming speed of 20 m/min.
Machine specifications →
1:10 Solar Strut Channel Machine — Forming Roll Bank | ZTRFM
the forming roll bank of the strut channel machine.
Machine specifications →
0:30 Solar Strut Channel Machine — Full Line Running | ZTRFM
the complete strut channel line running, showing all forming stations.
Machine specifications →Standing Seam Roll Forming Machine
1:10 Standing Seam Roof Panel Machine — Straight and Tapered Panels | ZTRFM
the standing seam line configured for both straight and tapered roof panels.
Machine specifications →
0:43 Standing Seam Roll Forming Machine — Line and Control Cabinet | ZTRFM
the standing seam machine with its control cabinet at the operator side.
Machine specifications →Stud & Track Roll Forming Machine
1:10 Stud & Track Roll Forming Machine — Forming Roll Detail | ZTRFM
a close-up of the forming roll set used for stud and track profiles.
Machine specifications →
1:06 Stud & Track Roll Forming Machine — Line Running with HMI | ZTRFM
the stud and track line running, with the touch-screen control panel visible.
Machine specifications →
1:03 Stud & Track Machine — Roll Tooling Set | ZTRFM
the roll tooling set for stud and track profiles.
Machine specifications →