All Roll Forming Machines
41 machine types across 9 categories. Every spec is verified against real order documentation. CE certified, FOB Tianjin.
Roofing & Cladding
Metal roofing sheets, wall cladding, standing seam, tile-effect and accessory profiles
Roof Sheet Roll Forming Machine
IBR, TR4/TR5, C20/C35/C44 — one base frame, interchangeable roll cassettes
Corrugated Sheet Roll Forming Machine
762 / 900 / 1000 mm corrugated iron roofing sheet, up to 30 m/min
Double Layer Roofing Machine
Two profile sets on one frame — ≈40% less floor space than two machines
Glazed Tile Roll Forming Machine
Roman, Spanish and stone-chip coated tile profiles, 828 / 1050 mm cover
Ridge Cap & Flashing Machine
Ridge, barge, valley and apron flashings — the accessory line that completes a roofing package
Standing Seam Roll Forming Machine
Klip-Lok, snap-lock and T-bar concealed-fastener profiles
Spanish Tile Roll Forming Machine
S-tile and barrel profiles reproducing traditional Mediterranean clay tiles
Metal Wall Cladding Machine
Ribbed, concealed-fix, soffit and fascia wall profiles for industrial buildings
Sound Barrier Panel Machine
Perforated and corrugated acoustic panels for highway and railway noise walls
Container & Modular Wall Panel Machine
Thin-gauge ribbed and flat panels for container conversions and prefab buildings
Roof Panel Curving Machine
Crimp curving and roll curving for arched and barrel roofs, minimum ≈3 m radius
US Standing Seam Roll Forming Machine
Standing seam panels in the imperial widths North American contractors specify — 12", 16" and 18". Snap-lock and mechanically seamed variants; factory line or portable site-roll configurations.
IBR Roof Sheet Roll Forming Machine
The IBR variant of the roof sheet line. IBR is its own profile family — 686 mm cover width, five ribs at 36-38 mm height — specified by name across Africa, the UK, Australia and India.
Light Steel Framing
Purlins, studs, tracks, sigma sections and drywall framing systems
CZ Purlin Roll Forming Machine
C and Z interchangeable, 60–350 mm web, servo C→Z change under 10 minutes
Sigma Purlin Roll Forming Machine
Sigma (Σ) and Omega (Ω) sections, higher capacity than a C purlin of the same depth
Light Gauge Steel Framing Machine
Structural LGS C/U profiles for wall, floor and roof framing, optional swage
Stud & Track Roll Forming Machine
Drywall stud and runner at 20–40 m/min — the highest-speed line in the range
Ceiling T-Bar Roll Forming Machine
Main tees, cross tees and wall angle with the continuous slot for cross-tee clips
Wall Angle & Corner Bead Machine
Corner bead, wall angle and plaster stop profiles — the lowest-cost machine in the range
Imperial Metal Stud Roll Forming Machine
The partition stud line for North American interior framing. 3-5/8" is the most common web depth; the machine adjusts to 2-1/2", 3-1/2", 4" and 6" without roll change.
AISI Light Gauge Steel Framing Machine
Imperial stud and track for the North American market. AISI S240 structural and S220 non-structural, 1-5/8" to 8" web depths, width-adjustable without cassette change.
Floor Decking
Composite and deep-rib profiled steel deck for multi-storey construction
Floor Deck Roll Forming Machine
Composite 50 mm and deep-rib 75 mm deck variants, inline embossing, shear-stud ready
US Composite Floor Deck Roll Forming Machine
2" and 3" composite floor deck for the North American market. 36" cover width, inline embossing for ASTM A900 shear bond, 22-16 gauge — the specification US structural engineers require.
Solar & Cable Tray
Strut channel, omega rails, PV mounting profiles and cable management systems
Solar Strut Channel Machine
Unistrut / P1000 channel with inline slotting; racking uprights on the same platform
Solar Omega Rail Machine
Omega and hat-section PV mounting rails in aluminium or galvanised steel
Cable Tray Roll Forming Machine
Perforated, solid and ladder cable tray, 100–600 mm wide, with inline perforating
NEMA Cable Tray Roll Forming Machine
Produces NEMA VE 1 ventilated trough, solid bottom trough and ladder tray side rails. Width-adjustable from 6" to 24" without cassette change — the standard for North American electrical installations.
Guardrail & Barrier
Highway W-beam guardrail, fence panels and scaffold plank lines
W-Beam Guardrail Machine
Highway guardrail to EN 1317 / ASTM M180, 4320 mm output, inline bolt punching
Fence Panel Roll Forming Machine
Palisade pales, rails and panel sections for perimeter security fencing
Scaffold Plank Line
Anti-slip steel scaffold planks formed and perforated in one pass
ASTM M180 Guardrail Roll Forming Machine
North American W-beam guardrail line. ASTM M180 Class A and Class B, 3,810 mm (12'6") sections, inline bolt hole punching — the specification US, Canadian and Latin American road authorities require.
Sandwich Panel
PU, PIR, EPS and rock wool insulated panel lines, plus metal embossing
Door & Shutter
Roller shutter slats and steel door frame profiles
Steel Door Frame Roll Forming Machine
L-frame, U-channel and Z-frame door profiles with optional hinge-hole punching
Roller Shutter Door Machine
C-slat, Z-slat, heavy 105 mm and perforated shutter slats, 15–30 m/min
Drainage & Gutter
Rain gutters, downpipes and steel drainage channels
Gutter & Downpipe Machine
Half-round, K-style and square gutters, downpipes and steel drainage channels
K-Style (Ogee) Gutter Roll Forming Machine
The North American gutter line. K-style (ogee) profiles in 4", 5" and 6" — the sizes a US seamless-gutter contractor actually runs — not the half-round used across Europe and Australia.
Auxiliary Equipment
Decoilers, levelers, slitting lines and coil processing equipment
Hydraulic Decoiler
3 T / 5 T / 10 T single or double-head decoilers with tension-controlled brake
Decoiling & Leveling Machine
Combined decoiler and 7/9/11-roller leveler — removes coil set and cross-bow
Steel Coil Slitting Line
Cut master coil to the exact widths your lines need, down to 20 mm
Truss & Roof Purlin Machine
Triangulated truss purlin sections for long-span roofs, 100–400 mm depth